Call Now : 971 4 5516371

Welcome to Graviton Interiors

GRAVITON is a boutique interior design and space planning partnership group, passionate about creativity and cutting edge corporate design. In our drive to deliver innovative and practical solutions to our customers, we utilize our experience in interior design, space planning, project management and execution.

In a collaborative approach with the customer, we apply design principals, space analysis and knowledge integration, in order to produce an interior of office, hospitality or retail space, which is attractive, productive and reflects your company values.

Our services cover the entire spectrum needed for a smart interior, right from design conceptualization to total Fit-out & Turnkey projects. We have built a credible reputation as one of the most reliable service providers, with a rich portfolio in the Commercial, Retail, Healthcare, Educational, Corporate, Exhibition, Residential sectors and created world class environments for occupiers of these sectors throughout the U.A.E. and Europe.

Translating ideas and dreams skillfully into the language of architecture is neither simple nor linear. It calls for experience and creativity, elegant solutions to complicated problems.

AUTHORITY APPROVAL

All the projects we acknowledge weather it is a small, medium or a large it all goes through careful planning and with a right process. In United Arab Emirate or any part of the world, the process differs as per the governance of law of the pertaining country. This may be geographical, technical or you can call it as ethical as we respect the procedures to undergo in the right manner. This can take up to 25 working days.

QUALITY CONTROL SYSTEM

GRAVITON INTERIORS applies a rigorous quality control discipline to their activities. Projects are also administered and managed in accordance with these requirements.

A periodic review will be carried out in the presence of the General Manager, who will authorize any corrective action to prevent the same source.

PROCESS CONTROL

A Quality and Process Control System is maintained by GRAVITON INTERIORS.

There are steps of Process Control that we follow 1. Commencement – Submittals 2. On-Site Activities – Installation 3. Completion – Adjust and Clean

SAFETY

GRAVITON INTERIOR DECORATION L.L.C is committed to providing a safe working environment for all its employees and project staff whether office based or on site.Precautions will be taken to provide safe systems of work, and to ensure that adequate instructions and information are available to enable potentially hazardous operations to be assessed and controlled.

How it Acutally Works

SERVICES

GRAVITON INTERIORS offers following products and services for hotels, restaurants, malls, offices, showrooms, commercial buildings, villas etc.

Our experienced Designer and Engineers deliver the best aesthetics, innovative solutions and Interior Design solutions that are both sustainable and functional.

"In most people's vocabularies, design means veneer. It's interior decorating. It's the fabric of the curtains and the sofa. But to me, nothing could be further from the meaning of design. Design is the fundamental soul of a man-made creation that ends up expressing itself in successive outer layers of the product or service"

Steve Jobs

International Projects

Contact Us

GRAVITON INTERIOR DECORATION L.L.C

Address: Office 1902, Churchill Towers, Business Bay Dubai, UAE.

UNITED ARAB EMIRATES, DUBAI
STANFORD CONTRACTING L.L.C

Address : Office 1902, Churchill Towers, Business Bay
Tel: +9714 5516371
Mob: +97155 1100613
Email: info@stanfordcont.com
Web: www.stanfordcont.com

AZERBAIJAN, BAKU
OPTIMIST MASTER

Address: Shirin Mirzeyev 71 d. 43 office
Tel: +99412 4080840
Mob: +99451 4141414
Email: info@optimistmaster.com
Web: www.optimistmaster.com

RUSSIA,MOSCOW
OTDELKA 05

Address: Dolgoprudniy city,office 5
Tel: 007(965) 156-39-74
Mob: 007(965) 156-39-74
Email: info@otdelka05.ru
Web: www.otdelka05.ru

AUTHORITY APPROVAL PROCEDURE

Authority Approval Procedure

All the projects we acknowledge weather it is a small, medium or a large it all goes through careful planning and with a right process. In United Arab Emirate or any part of the world, the process differs as per the governance of law of the pertaining country. This may be geographical, technical or you can call it as ethical as we respect the procedures to undergo in the right manner. This can take up to 25 working days.

The project process can be variable as below:

Project site located in Main Land of any Emirate:

1. Layout Approval by the building management/ Building Owner / Unit Owner/ consultant
2. Layout Approval from the concerned Municipality of the Emirate
3. Civil Defense Approval of the Emirate
4. Civil Engineering Department approval
5. Health and Safety Department Approval (certain category of projects)

Project site is located in TECOM Zone:

1. Layout Approval by Building Management or
2. Layout Approval by TECOM asset management
3. Approvals by zoning authority
4. Fire fighting works approvals by relevant authority

Project site is located in Jafza Zone:

1. Layout Approval by EHS (Environment, Health and Safety Authority)
2. Approval by CED (Civil Engineering Department)
3. Approvals for any fire fighting works involved
4. COC (Certificate of Conformity) to obtain permission to work

Project site is located in JLT:

1. Layout Approval by the building management/ Building Owner / Unit Owner/ consultant
2. Layout approval by Concordia/DMCC
3. Layout Approval by EHS (Environment, Health and Safety Authority)
4. Approval by CED (Civil Engineering Department)
5. Approvals for any fire fighting works involved
6. Approvals for any security systems integrated
7. COC (Certificate of Conformity) to obtain permission to work

Note: Graviton Interior Decoration LLC has provided the above information as per the pertaining laws and governance of the affirmed locations, though these procedures can be changed at any time without any notice. Hence, Graviton Interior Decoration LLC will provide the detailed procedures at the time of sign off of the projects to clients.

QUALITY CONTROL SYSTEM

Quality Control System

GRAVITON INTERIORS applies a rigorous quality control discipline to their activities. Projects are also administered and managed in accordance with these requirements.

A periodic review will be carried out in the presence of the General Manager, who will authorize any corrective action to prevent the same source.

Quality Plan Narrative

The preparation of the Project Quality Plan will be the responsibility of the Project Engineer and will be executed during mobilization. Reviews and updates will take place within each three-month period. The initial and subsequent issues of the Project Quality will be subject for review and approval by the General Manager.

GRAVITON INTERIORS have developed, and continue to develop, proceduresin manual form for quality control activities to ensure continuous improvement and customer confidence.

The technical requirements of the contract will be communicated to personnel
i) Selective but effective issue of the specification and drawings.
ii) Selective but effective issue of the project quality plan.
iii) Frequent staff meetings and briefings especially for technically demanding operations.

It is understood that the technical requirements of the client, as defined in the specification will be integrated into the GRAVITON INTERIORS Quality System, and will take precedence over corporate standards where deemed necessary by General Manager.

Quality Control Plans (QCPs) will be prepared for activities which require such control under the specification, or where in the opinion of management.

Quality would be adversely affected by the absence of such control.

QCPs will be prepared for relevant subcontractor activities and will ensure the testing and monitoring of their activities by witness and inspection.

PROCESS CONTROL

Process Control

A Quality and Process Control System is maintained by GRAVITON INTERIORS

Commencement – Submittals

Shop Drawings: Shop drawings are submitted to the lead consultant as required. Site conditions are verified and measurements taken prior to preparing shop drawings to ensure accurate installation of work.

Samples: Samples of materials, color and finishes etc. are submitted to the lead consultant for approval. Identical samples are held by our Quality Control Department.

Sample Unit: Samples of typical panels are submitted to the lead consultant for review where necessary. Sample unites remain on site and in our factory as a standard for both manufacture and installation work.

Product Date: Manufacturers' product date is submitted for each item as required by the Consultant to verify evidence of compliance.

Material Control – Delivery, Storage and Handling All materials and components are handled carefully to prevent damage and are assessed for compliance prior to production.

Wherever possible, components are not delivered to site until the work of wet trades is complete. Components are protected from moisture.

Tagging is utilized for identification purposes as necessary and secure storage areas maintained for portable items.

On-Site Activities – Installation

a) All materials and components are delivered to site as per site dimension and shop drawings for installation.
b) Installation takes pace in accordance with our own site requirements and manufacturer's instructions as specified. Necessary site adjustments assure correct and trouble-free installation
c) Allowances are made where fixed objects pass through, or project into or around, the periphery of installed work to permit normal movement without restriction.
d) Units are set level, plumb, and to line and location.
e) All openings are prepared to ensure that square and clean edges are left after cutting.
f) Ambient conditions of temperature, humidity and lighting are checked to ensure quality is maintained.

Completion – Adjust and Clean

a) All working parts are adjusted, as required, to operate smoothly without sticking and binding.
b) All adjacent surfaces are cleaned and identification marks removed.
c) Where necessary, final adjustments are made and installed items are
cleaned by removal of tape, temporary identification marks, debris, adhesive, etc.
d) Surplus materials, rubbish and debris resulting from the site works are removed and areas are left in a neat and clean condition.

SAFETY

Safety

GRAVITON INTERIOR DECORATION L.L.C is committed to providing a safe working environment for all its employees and project staff whether office based or on site.Precautions will be taken to provide safe systems of work, and to ensure that adequate instructions and information are available to enable potentially hazardous operations to be assessed and controlled.

Facilities will be provided to maintain proper consultation between management and employees, via routine safety meetings.

The company recognizes that early planning, effective prevention and control, personal protective equipment, accident reporting and good records are all part of an effective safe management policy. Subcontractors are similarly bound by this policy and are required to perform assessments of their operations and materials and, in liaison with GRAVITON INTERIORS, to provide a safe working environment for their employees and subcontractors.

Project Safety Procedures

It is our intention that safety procedures associated with the following will be provided to the project personnel. They will be made available to site supervision in the form of instructions or approved method statements.

a) Safe access to and from place of work
b) Fire prevention
c) Work in confined spaces
d) Substances hazardous to health
e) Electricity on site
f) Site plant and equipment
g) Personal protection equipment
h) Work at heights
i) Storage

Hazard reporting and subsequent action will be executed by surveillance, formal and informal, undertaken by GRAVITON INTERIORS staff on site and visiting safety/management personnel. Any breaches of procedure, or dangerous situations, will be notified to the responsible party, and work on the activity halted until corrective action is taken. First aid will be available to all on site and the first aiders will be identified.

Emergency procedures will be dependent on the configuration and layout of permanent and temporary works, and will address at the least safe access/exit in the case of fire.

Housekeeping and tidiness will be the responsibility of the Foreman.Subcontractors will be required to be involved in an effective housekeeping policy on site.

Visitors will not be allowed on site without personal protection equipment and they will be accompanied by GRAVITON INTERIORS personnel.

Project Safety Plan

The project safety plan has three functions:
a) To establish the safety management structure for the project.
b) To define the responsibilities for each person identified as having safety management duties.
c) To identify arrangements to minimize risks.
d) To ensure that subcontractors are aware of their responsibilities and carry out risk assessments accordingly.

Details of safety responsibilities will be documented in the Project Safety Plan for both GRAVITON INTERIOR DECORATION L.L.C staff and subcontractors.

Subcontractors will be required to submit method statements or risk assessments, which will be subject to approval.

The identification of materials, which require special handling, is also provided for in the safety plan together with precautions and responsibility for action. The control of substances hazardous to health will also be detailed.

DESIGNING & SPACE PLANNING

Translating ideas and dreams skillfully into the language of architecture is neither simple nor linear. It calls for experience and creativity, elegant solutions to complicated problems.

We've honed a process that organizes the innumerable details and decisions each project entails, yet remain keenly aware of when to guide you to be flexible and agile, or give you the confidence to stay the course with strong concepts.

With our wide assortment of furniture and building materials, our designers can help you select a suitable solution for your design intent and budget to reflect the specific needs of your business.

As we have a long history of dealing with particular suppliers and ranges of furniture and materials, we can veer you in the right direction to make the correct choices to suit your interior environment.

We're here to steward you through that experience; and believe that the collaborative process should be as fun and rewarding as the outcome!

PROJECT DOCUMENTATION

GOVERNMENT APPROVALS

TURNKEY SERVICES

TURNKEY SOLUTION APPROACH & PROCESS Phase I:

First Meeting:

Consultation and management questionnaire. Clearly identify clients' needs and objectives. Organizational structures and cross functional relationships.

Initial phase:

Upon the project confirmation from client, the below procedures will take place:

Assemble existing plans of building and office areas and draw up existing and the required plans.

Effective solutions are discussed at this time.
Space analysis.Visit the site.
Identify corporate identity to incorporate into design.
Documents procurements from you as a client to proceed for all relevant approval stages.
Space planning as per the initial questionnaire and space analysis.

Design Proposal:

Identifying the corporate identity and incorporating this into the design presentation.

The presentation consists of a personalized design proposal with a sample board and budgetary costs.

Furniture suggestions to work within your environment Lighting solutions to work with your design, enhancing the final layout Specialized areas – boardrooms & reception, pause & meeting rooms as well as AV rooms 2D, 3D Renderings and designs to give you an idea of the look and feel of the new space.

TURNKEY SOLUTION APPROACH & PROCESS Phase II:

Required approval from the client for proposed rendered design options.
Quotation for the implementation of the project as per approved design.Providing of BOQ.

Initial advance payment will be paid by a client. After approvals from government authorities ,shall start work progress.
Each phase of the construction or fit out works is monitored ,ensuring that the client is kept informed and up to date at all times.

The balance of payment will be issued by client as per progress of completed works.
Invitation sent to you for a site progress work inspection by us.
Snag works completion. Apply for project completion procedures by us to the relevant authorities for final inspec tions.
Final payment balance to be issued by the client. Handover the project site to client.

3D MOCKUPS

3D Mockups

PROJECT MANAGEMENT

Project Management

JOINERY WORKS

FIELD VERIFICATION

MEP WORKS

LIGHTING DESIGN

HVAC WORKS

CIVIL WORKS

LANDSCAPING SERVICES

CONSULTING

CONTRACTING

As one of UAE's largest building contractors, we are delivering flexible, intelligent and fit-for-purpose health, correctional services, education and commercial facilities. Setting new industry standards, our experience and ingenuity are the cornerstones of our cost-competitive and cutting-edge solutions. Performance-driven and with a passion for excellence, our focus on collaboration, innovation and understanding user needs ensures our success every time.

Stanford Contracting provides a comprehensive building and civil engineering service offering construction excellence to private and public sector clients across Dubai and the UAE. This is complemented by a range of specialist businesses offering engineering design, interiors and refurbishments, mining, mechanical & electrical design and installation, BIM and 3D modeling.

Whether delivering a standalone project or bringing strength as part of the Stanford team, the Construction division consistently demonstrates its flexibility, creativity and ability to deliver a standard of service and quality of product that underpins the longevity of its customer relationships.

Stanford Contracting strategically combines local knowledge with national presence, collaborating closely with every client to deliver the right result at the right price.

WEB SERVICES

Grafdom is one of the leading digital media agencies in the Middle East with expertise in Web Design, Social Media & Mobile Apps. The agency designs dynamic websites, manages social media networks, develops mobile apps and provides robust hosting solutions for some of the most recognized brands in the region. Grafdom has been instrumental in the successful execution of campaigns for companies of all sizes in Dubai, Abu Dhabi, Doha, Riyadh, Jeddah and Kuwait. As an industry pioneer in digital marketing, the company has had the opportunity of working with various government agencies in the UAE, multi-national corporations and young entrepreneurs.

GREEN ENERGY SERVICE

Green Initiative provides environment-friendly and energy solutions in the United Arab Emirates and Middle East. We offer consultation, solutions, product supply installation for the following industries: HORECA, LEISURE & ENTERTAINMENT and PROPERTIES from single unit villas to high rise towers.

Using our expertise in green solutions, we have a goal to make our world a better place -one person, one business, one building and one agency at a time.

Our innovative, multiple, and tailor made solutions will help you improve indoor comfort, maximize energy efficiency and reduce energy bills. We are emerging industry leaders in knowledge, professionalism and service.

We combine green and energy efficiency applications utilizing measures of environmental conservation and sustainability with measures of building science, data collection, and analysis, to achieve a whole systems approach to creating solutions unique to every project.